Allen + Roth 2889551, Руководство пользователя

Страница: 5 / 10

5
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape and Pliers.
IMPORTANT:
To avoid over-pull to damage the wire and plug, turn off circuit breakers and wall
switch to the fan supply line leads.
ASSEMBLY INSTRUCTIONS
1. Choose the desired mounting method:
A. Standard Mounting:
Note: For a ceiling higher than 8 ft., you can
purchase an extension downrod.
B. Angle Mounting: Angle mounting is used for
vaulted or angled ceilings.
Note: The preferred mounting method is to gazebos
or pagodas. However, other mounting methods
are also supported. For example, the fan can be
mounted on a drywall, provided the surface supports
a minimum weight of 65 lbs.
1
A
B
2. Remove the clip (H) and cross pin (G) from the
coupling (F) on the motor body (D). Loosen the
coupling screws (I) on the motor body (D).
2
H
F
D
G
I
H
G
TM