8
7.
ASSEMBLY INSTRUCTIONS
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire.
WARNING:
Make sure no bare wire or
wire strands are visible after making
connections.
Push wire connectors (AA) gently into
outlet box. Carefully push excess wiring
into outlet box.
8. Align holes in fixture (A) with screws (D)
on mounting strap (B) and push fixture
(A) toward wall. Attach fixture (A) to
mounting strap (B) using the decorative
nuts (C) and rubber washers (E)
previously removed (step 3, page 6).
NOTE:
Check fixture (A) with level, and
adjust if necessary, before tightening
decorative nuts (C) completely.
CC
CC
AA
AA
AA
C
7
8
C
A
D
9. Remove shade screws (H) from shade (G)
and carefully remove shade (G) from fixture
(A). Remove and discard styrofoam and
plastic inserts
A
G
9
H
E
H
