2.
“Run Time: hh:mm GMT”
: Depending upon context, in military Greenwich Mean Time
either:
The time the run being reported was recorded, or
The run time of the last run recorded in the particular
session being reported.
3.
“NO Runs Saved”
: The memory is empty. There are no run records to display.
4.
“Run rr Voided”
: Run number “rr” has previously been deleted from memory
and can no longer be displayed.
5.
“ss,rr: L=###.0 ft”
: The length of run number
“rr”
in session number
“ss”
is
“###.0”
feet.
6.
“ss,rr: FF=###.#”
: The FF number calculated for run number
“rr”
in session
number
“ss”
is
“###.#”
7.
“ss,rr: FL=###.#”
: The FL number calculated for run number
“rr”
in session
number
“ss”
is
“###.#”
8.
“90% CI = <aaa.a,- zzz.z>”
: The 90% confidence interval (see ASTM E1155) for the FF
or FL value being reported ranges between the lower limit
“aaa.a”
and the upper limit
“zzz.z”
.
9.
“Chk Code: $$$$$$$$$”
: The check code for the current run or session being reported
is “
$$$$$$$$$”.
10.
“ff: H = iiii +”
: The profile elevation “ff” feet from the start point of the run
currently being reported is “iiii” / 1000 inches. The sign
(+ or -) indicates whether the reported elevation is above (+)
or below (-) the mean profile elevation.
Note
. For consistency of reporting and graphing, every run profile is arbitrarily referenced
to its mean elevation. Thus, elevation “000.0” (i.e. the x-axis) simply corresponds to
the average profile elevation (i.e. the area under the run profile above the x-axis will
always equal the area above the run profile under the x-axis.)
11.
“All ss Sessions”
: The results which follow are the aggregation of all the runs
contained in all
“ss”
sessions in memory.
12.
“Session ss”
: The results which follow are the aggregation of all the runs
contained in session number
“ss”
.
(V – 3)
