Allen Engineering Corporation RS832, Руководство по эксплуатации и запасным частям

Страница: 36 / 104

056840 - 10/2012
SECTION 2
OPERATIONS
Page 2-10
2.3 Before Starting
The following instructions are intended as a basic guide for machine start-up and operation. Following
these instructions will help preserve and maintain the life of this equipment.
Fuel Check
DO NOT smoke while refuling, diesel fuel is highly flammable and can be dangerous if mishandled.
1. To check the engine fuel level, place the power unit on a secure flat surface with the engine stopped.
2. Remove the fuel filler cap and inspect the tank for fuel level.
3. If fuel level is low, fill with #2 clean fresh diesel fuel. Wipe up any spilled fuel immediately.
Fuel spillage on a hot engine can cause a fire
or explosion. If fuel spillage occurs, wipe up the
spilled fuel completely to prevent fire hazards.
NEVER smoke around or near a generator.
4. After replenishing fuel, make sure cap is securely tightened to fuel tank.
Hydraulic Oil Check
1. To check the hydraulic oil level, place the power unit on a secure flat surface with the engine stopped.
2. Visually inspect the hydraulic oil sight gauge located on the side of the hydraulic oil tank. For normal
operation the fluid level should be visable at the top of the sight glass.
3. If the hydraulic oil level is low, remove the hydraulic
oil cap and fill with type AW32 anti-wear type hydraulic
oil to the recommended operating level.
Normal Operating Level
Low Level, Add Hydraulic Fluid