background image

Installation Instructions

Original Instructions

PowerFlex DC Drive – Frame D, Series C to Series C Fan 
Replacement

Catalog Number SK-20P-S725804

Identify Frame D, Series C 
Drive

Verify that you are working on a Frame D, series C drive by checking the data 
nameplate label on the lower right side of the drive. The frame size is printed just 
above the serial number in the lower right corner of the label. The series letter is 
printed on the upper right corner of the label. 

ATTENTION: 

Only qualified personnel familiar with DC drives and associated 

machinery must plan or implement the installation, startup, and subsequent 
maintenance of the system. Failure to comply can result in personal injury and/
or equipment damage.

ATTENTION: 

To avoid an electric shock hazard, make sure that all power to the 

drive is removed before performing the following.

ATTENTION: 

This drive contains ESD (Electrostatic Discharge) sensitive parts 

and assemblies. Static control precautions are required when installing, testing, 
servicing, or repairing this assembly. If ESD control procedures are not followed, 
component damage can result. If you are not familiar with static control 
procedures, reference Allen-Bradley publication 8000-4.5.2, ‘Guarding Against 
Electrostatic Damage’ or any other applicable ESD protection handbook.

EXAMPLE ONL

Y

A0NNN

500HP

3 Phase

Original Firmware V. 5.007

Serial Number: D23E0042

Series: C

Frame: D

6.2
8.2

I/O: 24VDC (Standard)

Ind. Cont.

Listed

C

R

US

max.  1 Phase

Hz  1.0/0.5A  1 Phase

Eq. 31KF

N223

Содержание PowerFlex SK-20P-S725804









Отзывы: