Allen-Bradley PowerFlex 755 IP00 Скачать руководство пользователя

Страница: 36 / 78

Rockwell Automation Publication 750-IN020D-EN-P - May 2017

PowerFlex 755 IP00, NEMA/UL Open Type Drive

Lifting

The approximate maximum drive component weights are listed below.

Vertical Lifting

Attach Lifting Hardware

IMPORTANT

Consult the enclosure manufacturers documentation for proper enclosure
lifting procedures.

ATTENTION:

To guard against possible personal injury and/or equipment

damage:

•

Inspect all lifting hardware for proper attachment before lifting drive or
enclosure.

•

Do not allow any part of the drive, enclosure or lifting mechanism to make
contact with electrically charged conductors or components.

•

Do not subject the drive or enclosure to high rates of acceleration or
deceleration while transporting to the mounting location or when lifting.

•

Do not allow personnel or their limbs directly underneath the drive or
enclosure when it is being lifted and mounted.

Component

Weight

kg (lb)

AC Input

Common DC Input

Pod

5 (10)

Converter/DC Input with Precharge

64 (140)

Inverter

222 (490)

165 (363)

Drive Assembly (Open, IP00)

286 (630)

229 (504)

>1/2 A

<45°

>1/2 A

<45°

Содержание PowerFlex 755 IP00















































































Результаты поиска

Содержание PowerFlex 755 IP00

Отзывы:

Похожие инструкции для PowerFlex 755 IP00

Бренды по названию

Популярные бренды

Allen-Bradley PowerFlex 755 IP00, Руководство по установке

Результаты поиска

Содержание PowerFlex 755 IP00

Отзывы:

Похожие инструкции для PowerFlex 755 IP00

Бренды по названию

Популярные бренды