Hardware Features
Chapter 3
3-2
basic instruction set:
- relay-like instructions
- up to 488 timers and counters in the processors
- program control instructions
- data manipulation and comparison
- three-digit math (add, subtract, multiply, and divide)
advanced instruction set:
- jump instructions and subroutine programming
- block transfer instructions
- data-transfer file instructions
- sequencer instructions
- bit shift register instructions (bit shifts)
- EAF functions: 6-digit add, subtract, multiply and divide, square root,
Binary/BCD conversions, FIFO Load and Unload, log10, sine,
cosine, 10x
- The Mini-PLC-2/17 can perform these additional EAF functions:
loge, y+/- x and e+/- x, reciprocal of x, averaging, standard deviation,
PID, clock and calendar
The additional features of the various series of the processors are outlined
in Table 3.A.
Important: The processor features described in the previous section apply
to all series except where noted in Table 3.A.
Series Changes
