Allen-Bradley DeviceNet CompactPCI 1784-CPCIDS, Руководство по установке

Страница: 24 / 36

24 DeviceNet CompactPCI Communication Interface Card
Publication 1784-IN036B-EN-P - May 2001
Use the DeviceNet Test Application for the 1784-CPCIDS
Included with the IOLinx for 1784-PCIDS driver CD is a stand-alone test application
(DNetTest.exe) that lets you diagnose simple problems over the network before the
control application may be available for integration.
In addition, you can use the application to make certain that the 1784-CPCIDS
module has been correctly installed and is functioning in the PC.
The test application provides the features described on pages 24 through 27, which
include:
•
configuring the port
•
creating a view
•
using scanner mode
•
reading inputs
•
writing outputs
•
using the device status screen
Start the Test Application
The test application is automatically installed as part of the driver installation
procedure, although it does not show up as a shortcut on your screen.
To start the test application, click Start
⇒
Programs
⇒
Rockwell Software
⇒
IOLinx
⇒
IOLinx for DeviceNet
⇒
DeviceNet Test .
The test application assumes that you have the card installed, the network is
powered, and a scan list is loaded into the 1784-CPCIDS using RSNetWorx for
DeviceNet V2.11.51 or later. If the driver cannot establish communication with the
module, an error message is displayed.
Configure Port
You must configure the port the first time you use a 1784-CPCIDS card.
To configure the port, follow these steps:
1. Select Configure Port... from the Setup menu.
2. Select Allen-Bradley 1784-PCIDS from the DeviceNet Driver Selection
dialog.
3. Click on OK .
4. Set Node Address (0 - 63).