10
ControlNet Ex Modular Repeater Adapter & Fiber Repeater Module
Publication
1797-IN015G-EN-P - August 2017
European Hazardous Location Approval
The following applies to products marked
II (1)2 G
•
Are Equipment Group II, Equipment Category (1)2, and comply with
the Essential Health and Safety Requirements relating to the design
and construction of such equipment given in Annex II to Directive
2014/34/EU. See the EC Declaration of Conformity at
http://www.rockwellautomation.com/products/certification
for details.
•
The type of protection is “Ex ib[ia] IIC T4” according to
EN 60079-11.
•
Comply to Standards EN 60079-0:2006, EN 60079-11:2007, and
EN 60079-26:2004, reference certificate number
DMT 99 ATEX E 011 X.
•
Are intended for use in areas in which explosive atmospheres caused
by gases, vapors, mists, or air are likely to occur occasionally. Such
locations correspond to Zone 1 or 2 classification according to ATEX
directive 2014/34/EU.
IEC Hazardous Location Approval
The following applies to products with the IECEx certification:
•
Are intended for use in areas in which explosive atmospheres caused
by gases, vapors, mists, or air are likely to occur only infrequently and
for short periods. Such locations correspond to Zone 1 or 2
classification to IEC 60079-0.
•
The type of protection is “Ex ib IIC T4” and “Ex ib[ia] IIC T4”
according to IEC 60079-11.
•
Comply to Standards IEC 60079-0:2004, IEC 60079-11:2006,
reference IECEx certificate number IECEx BVS 09.0021X.
Special Conditions for Safe Use:
The fibre optic adapter type 1797-RPFM* can only be use in combination
with the ControlNet adapter type 1797-RPA*.