Allen-Bradley controllogix 1756-L63, Руководство пользователя

Страница: 92 / 435

Publication 1756-UM001E-EN-P - August 2002
5-16 Communicate with Another Controller over an EtherNet/IP Network
Enter a Message
A. Enter a MSG instruction and associated input instruction (s).
42424
B. In the MSG instruction, type a name for the message control tag
and press the
Enter key.
C. In the MSG instruction, right-click the message control tag and
select
New
tag_name.
(In older revisions of the software, the
menu option is Create
tag_name.
)
D. From the Scope list, select
name_of_controller
(controller) ,
and click OK .
42424
E. Enter
message.
EN.
where:
message
is the message control tag from step B.
F. If your message is to a PLC-5
®
or SLC 500
™
controller and it
reads or writes integers (not REALs), use a buffer of INTs in the
message.
•
ControlLogix controllers execute more efficiently and use less
memory when working with 32-bit integers (DINTs). Use the
DINT data type for integers whenever possible.
•
PLC-5 and SLC 500 controllers require 16-bit integers.
•
Use an INT buffer in the message and move the data into or
out of the buffer as required.
e
e
e
e
e
e condition
/
?
EN
DN
ER Message
Message Control
? ...
MSG
e
e
e
e
e condition
/
?
EN
DN
ER Type - Unconfigured
Message Control
message ...
MSG
E.