ControlLogix Current Loop Output Module
7
Publication 1756-5.36 - September 1999
Wire the Removable Terminal Block
:LUHWKH57%EHIRUHLQVWDOOLQJLWRQWRWKHPRGXOH8VHDLQFKPPPD[LPXP
IODWEODGHGVFUHZGULYHU
,03257$17
3XOOWKHKRXVLQJRIIRIWKH57%EHIRUHZLULQJ
6KLHOGHGFDEOHLVUHTXLUHGZKHQXVLQJWKLVPRGXOH:HUHFRPPHQGXVLQJ%HOGHQFDEOH
WRZLUHWKH57%7KH57%WHUPLQDWLRQVFDQDFFRPPRGDWHJDXJHVKLHOGHGZLUH
Connect grounded end of the cable
*URXQGWKHGUDLQZLUH
,03257$17:HUHFRPPHQGJURXQGLQJWKHGUDLQZLUHDWWKHILHOGVLGH,I\RXFDQQRW
JURXQGDWWKHILHOGVLGHJURXQGDWDQHDUWKJURXQGRQWKHFKDVVLVDVVKRZQEHORZ
&RQQHFWWKHLQVXODWHGZLUHVWRWKHILHOGVLGH
Connect ungrounded end of the cable
&XWWKHIRLOVKLHOGDQGGUDLQZLUHEDFNWRWKHFDEOHFDVLQJDQGDSSO\VKULQNZUDS
&RQQHFWWKHLQVXODWHGZLUHVWRWKH57%VHHSDJH
20104-M
20918-M
a. Remove a length
of cable jacket
from the
connecting cable.
b. Pull the foil shield
and bare drain
wire from the
insulated wire.
c. Twist the foil shield
and drain wire
together to form a
single strand.
d. Attach a ground lug
and apply heat
shrink tubing to the
exit area.
e. Connect the drain wire to a
chassis mounting tab.
Use any chassis mounting
tab that is designated as a
functional signal ground.
Chassis mounting tab
Drain wire with ground lug
4M or 5M (#10 or #12)
phillips screw and star
washer (or SEM screw)
4M or 5M (#10 or #12)
star washer
Allen-Bradley Drives