10
Industrial 17" CRT Monitor
Publication 6159-5.1
Panel Mounting Procedure
1.
Confirm that the shipping carton contains a package of 20 10-32 lock
nuts and 20 flat washers. You will need 18 nuts and washers for
installation.
2.
Refer to the physical dimension drawing (Figure 3) and confirm that
there is adequate space behind the panel. Remember to allow extra
space for circulation and cabling.
3.
Refer to the panel cutout drawing below for dimensions of the panel
cutout and mounting hole locations. Cut and drill the panel.
Note:
Use #10-32 or M5 self-locking nuts for mounting.
Figure 4
Panel Mounting Cutout