Allen-Bradley 5069-SERIAL Скачать руководство пользователя страница 71

Страница: 71 / 110

Rockwell Automation Publication 5069-UM003A-EN-P - May 2018

Chapter

Troubleshoot Your Module

Compact 5000™ I/O Serial modules use the following status indicators:

Module (MOD) Status Indicator - This indicator operates the same for all
Compact 5000 I/O Serial modules.

Module Status Indicator

Table 15

describes the Module (MOD) Status indicator on Compact 5000 I/

O Serial modules

Topic

Page

Module Status Indicator

Compact 5000 I/O Serial Module Status Indicators

Table 15 - Module Status Indicator - Compact 5000 I/O Module

Indicator State

Description

Recommended Action

Off

The module is not powered.

None if your application does not use the module

If your application uses the module and it is expected to be operating,
complete the following:
• Confirm that the system is powered.
• Confirm that the module is installed properly.

Steady green

The module has a connection to the owner-controller and is operating
normally.

None

Содержание 5069-SERIAL















































































































Результаты поиска

Содержание 5069-SERIAL

Отзывы:

Allen-Bradley 5069-SERIAL, Руководство пользователя, Страница: 71 / 110

Результаты поиска

Содержание 5069-SERIAL

Отзывы: