Adapter Plate Kit for PanelView 800, 7-inch and 10-inch Terminals
7
Publication 2711R-IN002A-EN-P - March 2015
5.
Use this table as a guide to insure an adequate gasket seal between the terminal and the panel.
Terminal Markings for
Alignment
Lever
Position
Panel Thickness Range
Typical
Gauge
1
1.52…2.01 mm (0.060…0.079 in.)
16
2
2.03…2.64 mm (0.08…0.104 in.)
14
3
2.67…3.15 mm (0.105…0.124 in.)
12
4
3.17…3.66 mm (0.125…0.144 in.)
10
5
3.68…4.16 mm (0.145…0.164 in.)
8/9
6
4.19…4.75 mm (0.165…0.187 in.)
7
ATTENTION:
Follow the instructions above to obtain a proper seal and to prevent potential
damage to the terminal. Rockwell Automation assumes no responsibility for water or
chemical damage to the terminal or other equipment within the enclosure because of
improper installation.
6
1
1
2
3
4
5
6
44881
