Allen-Bradley 2711P-RY2032 Скачать руководство пользователя страница 3

Rockwell Automation Publication 2711P-IN009J-EN-P - December 2017

3

Battery Replacement

Precautions

Perchlorate material – special handling may apply. See 

www.dtsc.ca.gov/hazardouswaste/

perchlorate

.

This perchlorate warning only applies to primary Lithium Manganese Dioxide (LiMnO

2

) cells 

or batteries, and products containing these cells or batteries, sold or distributed in California, 
USA.

These products contain a sealed lithium battery which may need to be replaced during the life of the product. 

At the end of its life, the battery contained in this product should be collected separately from any unsorted 
municipal waste.

The collection and recycling of batteries helps protect the environment and contributes to the conservation of 
natural resources as valuable materials are recovered.

WARNING: 

There is a danger of explosion if the lithium battery or real-time clock module in this product is 

incorrectly placed. Replace the battery only with the indicated type. Do not replace the battery or real-time 
clock module unless power has been removed or the area is known to be nonhazardous.

Do not dispose of the lithium battery or real-time clock module in a fire or incinerator. Dispose of the battery in 
accordance with the local regulations. For safety information on the handling of lithium batteries. including 
handling and disposing of leaking batteries, see Guidelines for Handling Lithium Batteries, publication 

AG-5.4

.

WARNING: 

The battery or real-time clock module in these products must only be changed in an area known to 

be nonhazardous.

ATTENTION: 

Work in a static-free environment and wear a properly grounded electrostatic discharge (ESD) 

wristband.

Be careful when touching any of the exposed electronic components to prevent damage from ESD.

Содержание 2711P-RY2032















Отзывы: