FLEX Ex Spring Clamp Terminal Base
7
1797-5.2 - September 1999
!
ATTENTION: Do not use any unused terminals on this
terminal base unit. Using these terminals as supporting
terminals can result in damage to the module and/or
unintended operation of your system.
Daisy-chaining
41110
+V, -V
Wiring when total module current power is less than 8.5W
Combination
Wiring when total module current power is greater than 8.5W
41111
+V, -V
<8.5W
+V, -V
<8.5W
You can use the daisy
chain configuration if
the total module power
draw is <8.5W.
Otherwise, power is
connected to individual
modules.
Other variations are possible depending upon individual module power.
Allen-Bradley