Digital Expansion Terminal Block CompactBlock LDX I/O 5
Publication 1790-IN005C-EN-P - January 2015
Overview
This document describes how to install the expansion blocks.
Install Your Module
Follow these steps to install the block:
1.
Mount the block.
2.
Connect the expansion blocks.
3.
Wire the expansion blocks.
These steps are explained in detail in the following sections.
Mount the Expansion Block
Mount the expansion block by connecting it to a previously-installed
CompactBlock LDX I/O base or expansion block.
Beginning with the base block, you can mount your expansion blocks either horizontally
or vertically:
•
horizontally (left to right)
– add expansion blocks in an end-to-end
configuration
WARNING:
When used in a Class I, Division 2, hazardous location, this
equipment must be mounted in a suitable enclosure with the proper wiring
method that complies with the governing electrical codes.