1769-L32E, 1769-L35E CompactLogix Controller
21
Publication
1769-IN020-C-EN-P - July 2007
7.
Click Ok.
8.
To permanently assign this configuration to the device,
highlight the device and click Disable BOOTP/DHCP.
When power is recycled, the device uses the configuration you
assigned and does not issue a BootP request.
Use RSLinx software to set the IP address
You can use RSLinx software, version 2.41 or later, to set the IP
address.
1.
Make sure the controller that uses the IP address is installed
and running.
2.
Connect to the controller via the serial connection (see page
15).
3.
Start RSLinx software.
The RSWho dialog opens.
4.
Navigate to the Ethernet network.
