Allen-Bradley 1756-L63XT, Руководство пользователя

Страница: 191 / 212

Rockwell Automation Publication 1756-UM001O-EN-P - October 2014 191
Troubleshoot the Module Appendix A
I/O Fault Codes
The controller indicates I/O faults on the status display in one of these formats:
• I/O Fault Local: X # XXXX message
• I/O Fault ModuleName # XXXX message
• I/O Fault ModuleParent : X # XXXX message
The first part of the format is used to indicate the location of the module with a
fault. How the location is indicated depends on your I/O configuration and the
properties of the module that are specified in Logix Designer application.
The latter part of the format, #XXXX message, can be used to diagnose the type
of I/O fault and potential corrective actions. For details about each I/O fault
code, see the Logix5000 Major, Minor, and I/O Fault Codes Programming
Manual, publication
1756-PM014
.
18 3 CIP Motion Axis Fault
18 4 CIP Motion Axis Fault Mfg
18 5 CIP Motion Fault
18 6 CIP Module Fault
18 7 Motion Group Fault
18 8 CIP Motion Configuration Fault
18 9 CIP Motion APR Fault
18 10 CIP Motion APR Fault Mfg
18 128 CIP Motion Guard Fault
Table 51 - I/O Fault Messages
Code Message
#0001 Connection Failure
#0002 Insufficient Resource
#0003 Invalid Value
#0004 IOI Syntax
#0005 Destination Unknown
#0006 Partial Data Transferred
#0007 Connection Lost
#0008 Service Unsupported
#0009 Invalid Attribute Value
#000A Attribute List Error
#000B State Already Exists
#000C Object Mode Conflict
#000D Object Already Exists
Table 50 - Major Fault Status Messages (Continued)
Type Code Message