Allen-Bradley 1747-OC Series, Руководство пользователя

Страница: 34 / 126

1747-UM001A-US-P - March 2000
3-4 Modifying BIOS Settings
Using the BIOS main menu on the 1747-OCF
The following table describes the main menu for the 1747-OCF BIOS.
Saving BIOS Settings The diagnostic and utilities disk that comes with the open controller CPU
module includes a
getcmos.exe
utility that saves current BIOS settings to
a file. You can also use this utility to restore BIOS settings from
information previously saved in a file (using this utility).
Storing BIOS Settings
To save current BIOS settings to a file:
getcmos> filename
The
getcmos.exe
utility works properly under DOS, a DOS shell in
Windows, and a DOS shell in Windows 95. The utility doesn’t work under
a DOS shell in Windows NT.
Restoring BIOS settings
The revision of BIOS must be the same between the open controller CPU
module and the BIOS data saved to a file. To restore BIOS settings from an
existing file:
getcmos filename
After you restore BIOS settings, reboot to make those settings active.The
real-time clock will not be correct after you restore BIOS settings.
Use this menu on the 1747-OCF: To specify or change:
Basic CMOS Configuration date/time
numlock setting
drive assignments
floppy drive types
boot order
IDE drive types
startup options
Peripheral Setup onboard parallel port
onboard serial ports
IRQs
L2 cache
Reset CMOS to last known values BIOS settings to last known values
Reset CMOS to factory defaults BIOS settings to defaults
Write to CMOS and Exit save BIOS changes you made
Exit without changing CMOS exit without saving BIOS changes you made