Allen-Bradley 1746-BAS Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 84

Allen-Bradley 1746-BAS Скачать руководство пользователя страница 17

Publication 1746-UM004A-US-P

Module and Development Software Overview

1-5

BASIC Development
Software (1747-PBASE)

The BASIC Development Software provides the user with a structured and
efficient means to create BASIC programs for the module. This software is loaded
into a an MS-DOS compatible personal computer. It uses the personal computer
to facilitate editing, compiling (translating), uploading, and downloading of
BASIC programs.

The BASIC Development Software has a menu-driven, window-type environment
that offers:

•

pull-down menus to access all editor functions

•

function key access to frequently used functions

•

multiple window editing

•

cut and paste support between windows

•

search and replace support

•

search between files support

•

built-in calculator that can paste results into your program

•

ASCII look-up table

•

line draw editor to create operator interface images without having to enter
ASCII characters

•

keystroke macros

•

undo and redo functions

•

extensive help messages for each menu, menu option, and for keywords
embedded in the menu text

•

capability to create user-defined macro libraries

•

sophisticated debug tools including watch windows, single-step operation, and
go to cursor breakpoint operation

•

syntax checked translations to native BASIC to reduce debug time

•

BASIC translator that steps through the BASIC program and identifies errors

•

ASCII terminal mode

•

hex file transfer support

The development software enables you to program the module from a personal
computer connected to either the module’s DH485 or PRT1 ports. The software
allows direct access to the module through terminal emulation over an RS-232/423
or DH485 network.

Refer to the

BASIC Development Software Programming Manual

(publication

number 1746-PM001A-US-P) for additional information on the software.

Spare Allen-Bradley Parts

«
...
15
16
17
18
19
...
»

Содержание 1746-BAS





















































































Отзывы:

Нет отзывов