Allen-Bradley 1606-XLPRED, Справочное руководство, Страница: 4 / 18

All parameters are specified at 24V, 2.5A, 230Vac input, 25ªC ambient and after a 5 minutes run-in time unless noted otherwise.
4 Rockwell Automation Publication 1606-RM035A-EN-P — April 2014
Bulletin 1606 Switched Mode Power Supplies
3. Input and Output Characteristics
Number of inputs - 2
Number of outputs - 1
Input voltage nom. DC 12-48V
±25%
The input circuitry must meet the SELV requirements
stipulated by IEC/EN/UL 60950-1.
Input voltage range - 9–60Vdc
Input voltage with restrictions nom. DC 12-120V
±25%
See note 3 at the bottom of the table
Input voltage range
with restrictions - 9-150Vdc Restrictions apply, see note 3 at the bottom of the table.
at 2x2.5A, see Fig. 3-2 Voltage drop, input to output typ. 0.8V
typ. 0.9V at 1x5A, see Fig. 3-3
typ. 0.9V at 2x5A, see Fig. 3-2
Input current nom. 2x 0-5A continuous
nom. 1x 0-10A continuous, see note 1
nom. 2x 5-8A for 5 seconds
Peak input current max. 125A for maximal 10ms per input
Output current nom. 10A continuous
nom. 10-16A for 5 seconds
max.
16A at continuous overload or short circuit, see note 2
Reverse current max. 0.6mA per input, -40°C to +60°C
Reverse voltage max. 200Vdc voltage applied to the output, continuously allowed
Note 1: Each input can be loaded up to 10A. At currents above 10A, the other input should not be loaded. It is preferable to parallel the two
inputs in order to minimize the power loss in such cases.
Note 2: Ensure that the continuous output current does not exceed 16A. Check the short-circuit current of the power sources and if the
power source can deliver more than 16A together, use an appropriate fuse on the output.
Note 3: The redundancy module can be used with input voltages up to 150Vdc with the constraint, that it can be used only as a single input
module at voltages above 60Vdc. Both inputs need to be connected together as shown in Fig. 3-1. Ensure proper means to protect
against touching this voltage.
Fig. 3-1 Restrictions for utilizing voltages between 60 and 150Vdc (See also Note 3)
AC
DC
(>60V)
+
-
Load
>60V
+
-
Power Supply
Power Supply
Diode Module
+
-
+
+
-
-
AC
DC
(>60V)
+
-
AC
DC
(>60V)
+
-
Load
>60V
+
-
Power Supply Diode Module
+
-
+
+
-
-
Diode Module
+
-
+
+
-
-
AC
DC
(>60V)
+
-
Power Supply