9
10
11
12
14
13
15
16
17
MASTER INSERT
Provides INSERT points for LR MIX output to connect hardware dynamics processors such as a
limiter, compressor, or graphic equaliser.
Or, connect FX hardware in-line with MIX output for external MASTER INSERT FX.
BOOTH Outputs
Balanced LINE level stereo output feed to DJ’s local monitor.
X:LINK
Connect XONE:K Series Controllers to the XONE:PX5 for remote software MIDI Control and
saving use of computer USB ports.
USB Soundcard
20 Channel (5 Stereo IN / 5 Stereo OUT), 24Bit/96kHz, Hi-Speed USB internal soundcard.
Mac OS X CoreAudio/CoreMIDI class compliant.
MIDI SYNC / OUT
MIDI Clock and MIDI Tx (transmit) signal output for syncing to external MIDI hardware.
AC Mains Input
Connect (supplied) cable with moulded plug compatible to local AC mains supply.
Turn AC supply to the mixer ON / OFF.
K-Slot
Security slot to connect locking, Kensington
®
type, anti-theft cable.
RECORD Outputs
Unbalanced RCA. Pre-MASTER level, LR MIX output for connection to external hardware record-
ing devices.
USB 9-10 Send Select Switch
Set CH5 USB SND to MST or FX to route LR MIX or FX SEND output via USB. For pre-MASTER
level stereo LR MIX recording to computer, or using FX SEND for software effects plug-ins.
For full details, please refer to the XONE:PX5 User Guide online at: www.allen-heath.com
17
16
15
13 12 11 10 9
14
REAR PANEL OVERVIEW cont.
FRONT PANEL OVERVIEW
Input Select Switches
Switch Channel A between XLR MIC, CH5 USB RTN soundcard input, or auxiliary CH A LINE
sources. Switch CH 1 - 4 inputs between RCA PHONO, CH 1 - 4 USB RTN soundcard inputs,
or alternative RCA LINE sources.
Channel GAIN Controls
Adjusts the Channel input sensitivity to compensate for different audio signal source levels
-
∞
/+10dB.
Channel Equalizer
Each main Channel is equipped with a powerful 3 band isolator EQ, providing a cont6dB
boost when fully clockwise and full attenuation (‘kill’) on each band when fully anti-clockwise.
X-FADE Assign Switch, CH 1 - 4
Used to assign the Channel to either the X (Left), or Y (Right) side of the cross-fader, or direct to
LR MIX bus (OFF).
Channel FILTER Select Switches, CH A / CH 1 - 4 / EXT RTN
Press to route post-GAIN / post-EQ / post-Fade level Channel audio to the FILTER.
2
1
3
4
5
11
10
9
8
12
16
15
14
14
13
17
6
7
4
1
2
5
3
20
19
18
