Allen & Heath 8
XONE:43 User Guide
PHONO / LINE INPUT CHANNELS 1, 2, 3 and 4
9
Channel Fader
A high quality, smooth travel fader adjusts the channel
signal level from fully off to fully on.
8
Channel Meter
Displays the channel signal level. It is pre-EQ and pre-
fader, allowing the input level to be displayed even if the
EQ is set to off on all bands.
The channel level control should be set so that the me-
ter averages around ‘0’ with loudest peaks no higher
than ‘+6’. Turn down the level control if the +10 indica-
tor lights.
7
Cue Switch
Press the Cue switch to listen to the channel pre-fade
signal in the headphones and see its level on the main
meters. Press the switch to deselect cue.
9
8
7
Содержание XONE:43
Страница 1: ...Allen Heath 1 XONE 43 User Guide USER GUIDE Publication AP9968_1 ...
Страница 5: ...Allen Heath 5 XONE 43 User Guide SETUP EXAMPLES ...
Страница 15: ...Allen Heath 15 XONE 43 User Guide PANEL DRAWINGS Rear Panel Front Panel ...
Страница 17: ...Allen Heath 17 XONE 43 User Guide BLOCK DIAGRAM ...