ALLEN & HEATH WZ20:8:2, Руководство по обслуживанию

Страница: 6 / 35

ALLEN & HEATH 2E-8SM
5
DIMENSIONS
The diagrams below give the dimensions for flightcasing the console.
INSTALLING THE CONSOLE
The MixWizard Series features the ALLEN & HEATH Quick Change Connector ( QCC ) system. The rear connector
module may be hinged and locked into either of two positions: Rear connectors for desktop operation with the control
panel sloped at a convenient 15 degrees, or Underside connectors for 19" rack mounting in a compact 10U space. The
connector position can be easily changed at any time to fit your application.
19" Rack Mounting
Mount the console in the rack
using 4x M6 bolts each side for
maximum strength. We
recommend you fit the bolts with
plastic cup washers to protect the
panel, and they look good... These
should be available from the
supplier of the rack unit or a good
hardware store.
To change the position
remove the crosshead
locking screw on each side,
swing the connector pod into
position, and refit the two
screws.
Do not transport or carry
the console with the locking
screws removed.
Do not attempt to remove
the connector pod from the
console.
Desktop Operation
The console is fitted with rubber feet to
ensure it does not slip or scratch the
work surface. The control panel is
angled at 15 degrees for operating
convenience.