ALLEN & HEATH ML 3000, Руководство по обслуживанию

Страница: 19 / 84

ML3000 Service Manual
19
Console Computer and Operating Software
Operating Software Version Number
You can check the current version number of the
ML3000 software running on the console using a
PC connected via RS232. Instructions for this are
provided on the Allen & Heath Internet site.
Loading New Operating Software
Check the Allen & Heath Web site for the latest
version of console software. New software is
loaded from a PC via the RS232 port.
IMPORTANT ! The current console settings and
snapshots may be lost when you load new
operating software
. If you wish to keep your
settings and snapshot contents, first archive them
using the dump out facility. Restore these after
loading the new software by using dump in.
Download the software from the Allen & Heath Web
site to your PC computer. Connect the PC RS232
port to the console RS232 port using a standard
pin-to-pin (not null modem) 9-pin serial cable. Set
the console rear panel switch to the RS232 position.
Power up the console. The console awaits data
from the PC. Follow the instructions provided on
the Web site for loading the new software into the
console. When completed make sure you set the
console rear panel switch back to its normal
operating position, typically MIDI.
Power Up and Power Down
The console settings are remembered when power
is removed. On power up these settings are
restored.
To Reset the Console Settings
Hold down the ASSIGN and VIEW keys together
while powering up the console to reset all current
settings. This does not affect the contents of the
snapshot memories. The default settings are
restored:
•
Selects normal console operating mode
•
Clears all current Mute Group assignments
•
Clears all current VCA Group assignments
To Reset the Snapshot Memories
Hold down the ASSIGN and MIDI keys together
while powering up the console to clear all the
snapshot memories. This does not affect the
current console settings. For all snapshots reset:
•
Clears all stored mutes
•
Clears all stored VCA Group assignments
To reset all Settings and Memories
Hold down the ASSIGN, VIEW and MIDI keys
together while powering up the console to clear all
current settings and the memories.
SLAVE
mode
RS232
MIDI
Press and Hold with GRP MUTE
View on channels
MIDI
DUMP
CH1-16
Assign MUTE and VCA groups:
Select using GRP MUTE
Assign using CH MUTES
ASSIGN
VIEW