M-SQ-WAVES3 Fitting Note
AP11564 Issue 1
SQ Waves Option Card
M-SQ-WAVES3 is one of several audio networking options that can be fitted to
an Allen & Heath SQ mixer. It provides a 64x64ch 48/96kHz interface to the
Waves SoundGrid networking and processing platform.
Fitting the card
1.
Switch the system off.
2.
Use a Torx T8 driver to remove the 2 screws securing the I/O Port
blank panel to the SQ mixer.
3.
Slide the card into the slot and press it firmly into the mating
connector.
4.
Refit the 2 screws to secure the card.
Software and firmware
Go to the Waves website to learn more about Waves for the Allen & Heath
platform:
http://www.waves.com/live-sound/allen-heath
Download further documentation, follow the instructions, set up the hardware
and install the card driver and software:
http://www.waves.com/downloads/allen-heath
Download and install the latest version of SQ firmware:
http://www.allen-heath.com/sq-software
M-SQ-WAVES3 requires SQ firmware V1.3 or higher.
