M-DL-WAVES3 fitting note
2
AP10844 Issue 1
Front panel
Setting clock and patching signals
Use the dLive
I/O
screen to patch signals from or to the I/O Ports.
Use the
MixRack / Audio / Audio Sync
screen to select the clock source. Set
this to Internal on the master system, or to the relevant I/O Port on all other
networked (clock slave) systems.
For more information on dLive setup and functions please
refer to the dLive Firmware Reference Guide available for
download at
A limited one year manufacturer’s warranty applies to this product, the conditions
of which can be found at:
This product complies with the European Electromagnetic
Compatibility directive 2014/30/EU and the European Low Voltage
directive 2014/35/EU.
Copyright © 2016 Allen & Heath. All rights reserved.
ALLEN
&
HEATH
Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
Link Status
Flashes to indicate network
activity
SoundGrid ports
A built-in Gigabit switch with 3 locking EtherCon
ports for connecting up to three devices directly
