IP1 Getting Started Guide
10
Issue 2
Subnet Mask
255.255.255.0
Gateway
192.168.1.254
There are two ways of editing these settings:
Browser access
–
Connect the IP1 and a PC or Mac computer
to the same PoE network switch. Set your computer to a
compatible, static IP Address, for example 192.168.1.100 with
Subnet 255.255.255.0. Open a web browser and type the IP1
default IP Address
192.168.1.74
in the URL bar. This will give
access to its network settings. Repeat the operation for each IP1
unit in the system.
System software
–
Connect the IP1 and a dLive/Avantis/AHM
Network port to the same PoE network switch. Use the mixer
touchscreen interface or Director / System Manager software to
edit the IP1 network settings. Once applied, repeat the operation
for each IP1 unit in the system.
Refer to the mixer or AHM processor guides available for
Reset Network Settings
Jumper link
CN9
on the main PCB board lets you reset the
network settings to factory default. To reset, short the link for 10s
whilst applying power to the unit.
