ALLEN & HEATH GLD-080, Руководство по обслуживанию

Страница: 3 / 17

ALLEN & HEATH
GLD-080 service manual _1_1 3
Limited One Year Warranty
This product is warranted to be free from defects in materials or workmanship for period of one
year from the date of purchase by the original owner. To ensure a high level of performance and
reliability for which this equipment has been designed and manufactured, read this User Guide be-
fore operating. In the event of a failure, notify and return the defective unit to ALLEN & HEATH
Limited or its authorised agent as soon as possible for repair under warranty subject to the follow-
ing conditions
Conditions of Warranty
The equipment has been installed and operated in accordance with the instructions in this User
Guide. The equipment has not been subject to misuse either intended or accidental, neglect, or
alteration other than as described in the User Guide or Service Manual, or approved by ALLEN &
HEATH. Any necessary adjustment, alteration or repair has been carried out by ALLEN & HEATH
or its authorised agent. This warranty does not cover fader wear and tear. The defective unit is to
be returned carriage prepaid to ALLEN & HEATH or its authorised agent with proof of purchase.
Units returned should be packed to avoid transit damage. In certain territories the terms may vary.
Check with your ALLEN & HEATH agent for any additional warranty which may apply.
For further assistance please contact our distributor or your territory.
Parts Iden fi ca on
or full parts iden fi ca on, refer to the GLD ‐ 080 Parts Iden fi ca on
document available via the Technical Resources tab on the
distributor log ‐ in web pages.
Diagnos cs
Allen & Heath do not publish schema cs that contain digital audio
and control circuitry.
Repair of the GLD system is by diagnosing which PCB or harness is
faulty and replacing the part.
The GLD SBC manages all data fl ow and control, via USB.
Audio IN/OUT to and from the DSP and internal DC supplies are
carried between PCBs by fl at harnesses.
With power OFF : Disconnec ng USB connec ons and fl at
harnesses may help the engineer to diagnose which harness or PCB
is faulty.