Front and rear panels
DX Link 1-4 Four DX Link sockets each capable of 32x32 channels of
96kHz audio. Each DX Link socket can be connected to 1 DX32 or up to 2
DX168/DX16-4W expanders. A status LED flashes yellow for Link activity and
illuminates red to indicate a stream error.
gigaACE For connection to an SQ SLink port, or gigaACE card in a dLive
system. The gigaACE connection provides 128x128 channels of audio at
96kHz. A status LED flashes yellow for Link activity and illuminates red to
indicate a stream error.
Vents Ensure good ventilation at the rear of the DX Hub. Avoid obstruction
of vents while operating. Avoid dirt or liquid ingress. Maximum operating
temperature 40
°C
Power IEC connector and fuse for the built-in universal voltage power
supply unit. This accepts voltages from 100 to 240V AC 50/60Hz. Check that
you have received the correct mains lead for your territory.
Read the Safety Instructions Sheet included with the product and the information printed on the panel before operating.
A limited one year manufacturer’s warranty applies to this product, the conditions of which can be found at:
www.allen-heath.com/legal
By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End
User Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal
Register your DX Hub with Allen & Heath online at: http://www.allen-heath.com/support/register-product/
Check the Allen & Heath website for the latest documentation and software updates
ALLEN
&
HEATH
Copyright © 2018 Allen & Heath. All rights reserved.
