3. Position the base plate.
4. Screw or anchor the base plate tightly.
5. Replace the cover.
6. Press the cover against the base plate and screw the cover back in
place.
5 Programming
This list briefly describes all programming codes. Enter programming
mode (press 0 for more than 2 seconds) and enter the code.
You will find detailed descriptions on handling in LSM, among other
things, in the detailed manual.
Code
Function (knowledge)
Entire input
01
Unlock user with initial PIN
0 long + 01 + initial PIN +
User PIN (new) + User PIN
(new)
03
Change forgotten user PIN with re-
placement PIN
0 long + 03 + replacement PIN
+ User PIN (new) + User PIN
(new)
04
Delete user
0 long + 04 + Master PIN +
transponder ID
PinCode-Terminal
5. Programming
31 / 148
EN
