L9000-Series 180 degree indicator installation instructions – sectional trim
Schlage • L-Series service manual • 221
INDICATOR LOCK RETROFIT INSTRUCTIONS
Indicator Retrofit Options:
Coin turn
Thumb turn
Emergency
turn
Cylinder
1
Remove armor front
2
Remove cylinder(s) or thumb turn if applicable
2a Loosen the cylinder mounting screw.
2b
Remove the outside cylinder, if applicable.
Insert the key halfway into the cylinder and rotate
cylinder counterclockwise to remove.
Key inserted halfway
2c
Repeat for the inside cylinder, if applicable.
2d
Remove inside or outside turns, if applicable.
3
Check door preparation
IMPORTANT
• To install the indicator trim, additional door preparation
may be required. If additional door preparation is required,
remove the lock chassis from the door before drilling. Steps
for reassembly are included in this instruction sheet.
•
Please refer to the template included in this package.
•
Make sure the door is prepared with any necessary holes for
the indicator trim.
4
Complete installation of indicator trim
Go to STEP 11 ON PAGE 4 and follow the instructions to
complete the installation of the indicator trim.
Customer Service
1-877-671-7011
www.allegion.com/us
Содержание Schlage L-Series
