3 Mounting the terminal
© 2022 Interflex Datensysteme GmbH | IF-5835 Time Recording Terminal | 07.22
10
3.3 Mounting and connecting the PoE connector
PE
AC/DC-
AC/DC+
1
2
3
4
1
Back panel of housing
2
Network cable
3
Screws for fastening the PoE connector
to the back panel of the housing
4
Flat conductor cable
1. Screw the PoE connector to the threaded bolt on the back panel of the housing
1
using both
screws provided .
2. Insert the network cable into the cutout of the metal back panel and plug the RJ45 plug
2
into
the socket of the PoE connector.
3. Connect the PoE connector to the terminal via the flat cable with interference suppression
cores
4
as shown in the figure.
Power supply and functional grounding
There are two ways to power the terminal:
n
Via a network cable, the RJ45 connector of which also ensures the functional grounding
n
Via an external power supply that is connected to the screw terminal. In this case, the
functional grounding is ensured via connection to the PE terminal.
