www.allavino.com
7
1-800-710-9939
Care and Maintenance
Cleaning your beverage center:
Turn off the power, unplug the appliance, and remove all items including all shelves.
Wash the inside surfaces with warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse and wipe dry with a clean soft cloth.
Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with steel
particles and rusting may occur.
Dust the front grill and back of the unit twice yearly. Make sure the power is off before cleaning.
It is recommended to clean the unit completely inside and out yearly to maximize the longevity of the product.
Moving Your beverage center:
Remove all cans and any other items you may have inside the unit.
Securely tape down all loose items (shelves) inside your appliance and tape the door shut.
Turn the adjustable leg up to the base to avoid damage.
Be sure the appliance stays secure in the upright position during transportation.
Protect the outside of the appliance with a blanket or similar item.
Troubleshooting
There are many common issues you may experience with your beverage center that can be solved very easily, without
the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:
PROBLEM
POSSIBLE CAUSE
Beverage center does not operate
Not plugged in or the appliance is turned off
The circuit breaker tripped or a fuse has blown out
Beverage center is not cold enough
Check the temperature control setting
External environment may require a higher setting
The door is opened too often
The door is not closed completely
The door gasket is not sealing properly
Beverage center is turning on and off frequently
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work
Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light button is “OFF”.
Vibrations
Check to assure that the Beverage center is on a level surface.
The beverage center seems to make too much noise
A faint humming noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the
flow of refrigerator in your beverage center.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The beverage center is not on a level surface.
The door will not close properly
The beverage center is not on a level surface.
The gasket is dirty.
The shelves are out of position.
