All-Power APW5118, Руководство пользователя, Страница: 14 / 23

13
Owner’s Manual
Maintenance
Another method of reducing risks of freeze damage is to drain your pressure washer as
follows:
1. Stop the pressure washer and detach supply hose and high pressure hose. Squeeze
the trigger of the discharge gun to drain all water from the wand and hose.
2. Restart the pressure washer and let it run briefly about 5 seconds) until water no
longer discharges from the high pressure outlet.
Engine Storage
When the pressure washer is not being used or is being stored for more than a month
follow these instructions:
1. Replenish engine oil to upper level.
2. Drain gasoline from fuel tank, fuel line, fuel valve and carburetor.
3. Pour about one teaspoon of engine oil through the sparkplug hole, pull the recoil
starter slowly until you feel increase pressure which indicates the piston is on its
compression stroke and leave it in the position. This closes both the intake and exhaust
valves to prevent the inside of the cylinder from rusting.
4. Cover the pressure washer and store in a clean, dry place that is well ventilated
away from open flame or sparks.
NOTE: The use of a fuel additive, such as STA-BIL, or an equivalent, will minimize
the formulation of fuel gum deposits during storage.
Technical Specification
Maximum Inlet Pressure Up To 90 PSI
Maximum Pressure 3200 PSI
Rated Flow 2.6 GPM
Engine Model JF210
Displacement 208 cc
RPM 3600 RPM
Fuel Tank 0.95 gallon
Temperature OF Pumped Fluids Up To 80
Inlet Ports (2) 1/2 inch BSP
Discharge Ports (2) 1/2 inch BSP
Weight 81.6 lbs.
Engine Oil 10W-30
Fuel Unleaded Gas