Owner’s Manual
6. Secure the cable to the handle using the
clips.(See Figure 6)
Figure 6
7.Attaching the Grass Catcher to the Mower Base
Note:This mower can be used with or without
grass catcher.
Step1:1.Place the 2 Grass Catcher side bar hooks
Reel Mower as shown in Figure 7.
onto both sides of the Grass Catcher Hooks on
both sides of the Grass Catcher Hooks on back of
Figure 7
Step 2:Wrap the Security Belt, located on the back
the grass catcher, around the center joint of the
Lower handles and lock buckle into place, as
shown in Figure G (also refer to figure on front
cover for reference if needed).Note the length
of the Security Belt can be adjusted by modifying
the Security Belt Length Adjustment Loop.
of
(Figure 8)
Figure 8
5. Once the Handle is assembled connect the plug on the handle cable to the
socket on the main unit. Tighten the screw ring to secure the cable.
(See Figure 5)
Figture 5
3 cable
6
