19.2V Cordless Drill
10
Operation (cont’d)
Torque adjustments
The drill is fitted with a torque setting ring
to vary the amount of torque produced
when drilling or screwdriving.
1
Select the setting by rotating the torque
setting ring to align with the torque
setting indicator.
2
The torque is lowest when setting 1 is
selected and highest when setting 19 is selected.
3
When the 1 symbol is selected, the clutch is designed not to slip and
therefore most drilling applications should be performed on this setting.
As a guide for drilling, lower torque settings will be most effective for
drilling smaller holes and/or in softer materials, and higher settings for
larger holes and/or harder materials.
4
To select the correct torque setting for screwdriving, first set the torque
setting ring to position 1.
5
Fit and tighten the first screw.
6
If the clutch starts to slip before the screw is correctly seated, rotate the
setting ring to a higher number until the clutch slips only when the head
of the screw is flush with the surface of the material.
7
The 19 settings are provided to vary the amount of torque available to
seat screws of different sizes in a variety of materials.
WARNING! BEFORE ADJUSTING THE TORQUE SETTING, MAKE SURE
THAT THE DIRECTION SELECTOR IS IN THE CENTRAL LOCKED OFF
POSITION.
