background image

PAGE 6

2.

If necessary, add a 

premium quality, 30-weight, non-detergent compressor oil

into the Oil Fill Hole until the level of oil reaches the maximum level as indicated 
on the Oil Window (20B).  The optimal capacity of the oil reservoir is 30 ounces.  

Do not overfill

. Then thread the Breather Valve back into the Oil Fill Hole, being 

careful not to strip the plastic threads.

(See Figure C, and Assy. Diagram B.)

To Turn The Air Compressor On:

1.

Check to make sure the Water Drain Valve (10A) is fully closed.

2.

Turn the Air Flow Valve (6A) to its “OFF” position.

3.

Connect the air hose (not provided) to the Air Flow Valve (6A) of the Air Com-
pressor.  Then, connect the other end of the air hose to the pneumatic tool (not 
provided) that is to be used.

4.

Note: Always plug the Power Cord of the Air Compressor into a 115 V~ 
electrical source (±10% maximum variation).

5.

Rotate the “ON/OFF” Power Switch (1A) to the horizontal position to turn the Air 
Compressor

on

.  (Rotate the “ON/OFF” Power Switch (1A) to the vertical position 

to turn the Air Compressor 

off

.)

6. 

Allow sufficient time for the

 Tank Pressure Gauge (4A) to indicate 

80 PSI

 before 

using the Air Compressor.

7.

Turn the Air Flow Valve (6A) to its “ON” position to allow air to the pneumatic tool.

FIGURE C

Breather Valve (14B)

Oil Window (20B)

Front Cover (18B)

Содержание APC4017













Отзывы: