All Pond Solutions PFC-12000, Руководство пользователя

Страница: 4 / 53

ELECTRIC
This unit comes complete with a generous supply of 3 core cable, however
should any additional cable be required, the use of an approved waterproof
cable connector with a proper rating is essential. A cord rated for less amperes
or watts than the appliance rating may overheat.
Please Ensure:
·
The power supply must be earthed and fused at 3amps.
·
You regularly inspect the cable for damage and deterioration.
·
Do not connect to any voltage other than that stated.
·
You consult a qualified electrician if in doubt about any aspects of
wiring.
·
A residential current device (RCD) is used for additional safety
·
You have complied with Local Electricity Authority regulations if
permanently installing to the mains supply.
Please Ensure: The power supply must be earthed and fused at 3amps.
Regularly inspect the cable for damage and deterioration. Consult a qualified
electrician if in doubt about any aspects of wiring.
·
The pressure of your unit depends on many factors such as location (height
and distance from your pond), power and location of the connected pump
(L/H), pond depth, stock density and hose dimensions. To enhance pond
water quality, we recommend considering these factors to ensure
maximum efficience and avoid low return pressure.
·
If positioning your filter above ground, ensure it is located at least 2 metres
from your pond edge. If your filter will be sunk into the ground, you can
position the unit closer to the water.
·
Place your filter on a level and sturdy surface that is well ventilated and not
at risk of flooding.
·
To avoid overheating, ensure the filter is not covered and is positioned away
from direct sunlight.
·
Position the filter so the hosing connected to the Water Inlet Point and
Water Outlet Points is not bent or obstructed.
CHOOSING YOUR FILTER LOCATION