The Setup Menus provide access to selections and settings used for operation of the filler.
When selected, the following menus can be accessed and used.
The Setup Target Weight screen provides access to selections to define product name, tar-
get filling weight, and filling amount feedback operation.
Product Name
Each product, batch, lot, etc., can be associated with a particular Setup Program using the
Product Name selection. Pressing Product Name causes a keyboard to be displayed. Any
alphanumeric character (0-9/A-Z) can be used.
This selection is available from the Setup Target Weight menu.
Factory Setting:
(blank)
Valid Entries:
10-char.
Target Weight
The total amount of material to be dispensed during filling is defined with this selection. You
should enter the desired, final, filled weight.
Feedback control selections (see following) use this Target Weight value for feedback calcu-
lation and correction.
This selection is available from the Setup Target Weight menu.
Factory Setting:
0.00
Valid Entries:
0.00-9999.99
Feedback Control
Selects the type of feedback used for correction of fill weights. The following selections are
available:
Servo
Defines a raise/lower signal used as feedback to
the filler. Typically, servo raise/lower signals are
provided by checkweighers. When selected as
“Servo” the Feedback Sec./Wt. selection is used to
specify how fill weights are corrected.
A&D Scale
Defines a scale to provide feedback correction to
the filler. When selected as “A&D Scale” the
Feedback Samples selection is used to specify how
fill weights are corrected.
None
Feedback not used.
Model B-SV-600 Touch Screen Control Panel Users Manual
23
AFI Publication 1240410
•
Issue: 1
•
April 2010
Setup Menus
Setup Target Weight
