ALKAI Active X M1, Руководство пользователя

Страница: 5 / 14

INSERT A MASSAGE ATTACHMENT
• Make sure the massage gun is fully charged and powered OFF.
• Select the desired massageattachment.
• Insert the stem of the attachment into the unit and press firmly to secure it.
OPERATING INSTRUCTIONS
Please read the operating instructions before using the massage gun. Keep this manual for
reference.
CHARGING
• Fully charge your M1 (for up to six hours) before using it for the first time.
• After the first charge, your M1 should only take about 3 hours to charge.
• Full charge is indicated when Battery icon on the LCD stop flashing and remain full lit.
• Average run-time is 6 hours (depending on the speed level used).
• We recommend not fully depleting the battery to the lowest .
• The manufacturer's recommended charging temperature is 32° – 113°F.
1. Slide the Power switch to the ON position.
2. Touch the mode button on the front of the unit to toggle through the 3 modes (Fitness/
Medical/Health).
3. After selecting the mode, use the up and down buttons to select the appropriate speed(You
can refer to the previous speed introduction).
4. At the desired speed, float the head of the massage attachment along a muscle group.
Apply pressure as needed.
5. The recommended time for personal use is no more than half an hour.
REMOVING AND REPLACING A MASSAGE ATTACHMENT
1. Slide the Power switch to OFF to power-off the M1.
2. Grab the inserted attachment and firmly pull out to remove it.
3. Insert the stem of a new attachment into the unit, press firmly to secure.
1. Use a slightly damp towel to clean the device and dry with a soft cloth.
2. For storage or travel, store in the supplied carrying case.
3. Please power off the device while not in use.
4. Do not dismantle the massage gun by yourself.
MAINTENANCE, CLEANING & STORAGE
USING YOUR MASSAGE GUN