5
generated while welding.
* It is should be equipped in the open air where there is no direct sunlight, anti-rain,
temperature range from -10
℃
to +40
℃
and low humidity place.
* 50cm space is needed to ensure good ventilation.
* No metal impurities are tolerant inside the welder.
* In some areas, there is no severe vibration.
* Make sure no interference will be caused to the surrounding in the welding area.
* Whether the power supply capacity is sufficient to allow the welder to work
normally or not. And a safety protection device should be equipped in the input
power.
* Prevent it from dumping if the welder is put in the place of over 10
°
incline.
2.4 Security Check
The following items must be checked up by the operator each time before access to
the power source.
* Make sure the power socket is reliably grounded.
* Make sure the output terminals are well connected without short circuit.
* Make sure output and input cables are perfect with no exposure.
The welding machine must be inspected by professionals at regular time (not exceed 6
months). The contents as follow:
* Whether the electronic components are loosed or not and dust removal must be
conducted.
* Whether the panel mounted on the device should be able to guarantee the normal
implementation of the machine.
* Whether the input cables are damaged or not. If yes, safe handling must done.
Warning!
Disconnect the power source before servicing it. Contact with the manufacturer
