35
8VHIXOIXQFWLRQV
6LQJOHEDQGPRGH
This is to use the unit as a single-band transceiver only for VHF or UHF, by eliminating the display on the one
side.
1.
Press FUNC key and while [FUNC]
appears on the display press VOL knob
for desired side. Eliminated band will not
operate.
2.
To return repeat above sequence.
9)2$XWRSURJUDP6HWWLQJIXQFWLRQ
This is to program various automatic setting in a certain frequency range in the VFO mode.
It is useful for quick repeater access.
1.
Program the lower edge frequency of the
desired range as well as other parameters
such as repeater shift, CTCSS tone into
the APL channel in the memory mode.
Programmable items are frequency, shift
direction, offset frequency, tone ENC
frequency and its setting, tone DEC
frequency and its setting, DCSEN code
and its setting, and DCSDEC setting.
Press V/M key to complete this process.
2.
As above, program the higher edge
frequency in the APH channel of the
memory. Disregard other settings such as
CTCSS tones or repeater shift. APH
frequency cannot be smaller than APL
frequency.
3.
Disable tone and shift for step1 in the VFO
mode and confirm the frequency range
between APL and APH. Temporary setting
change is possible between APL and APH,
but once the frequency is changed by
rotating the dial, all the preset values in APL
will be restored.
When 439.000MHz 88.5Hz
ENC-5.000MHz shift is set in AL
Shows an example within
VFO auto-program setting
