18
Basic Operations
Shift Direction and Offset frequency setting
Conventional repeaters are operated in the DUPLEX mode, which receives an incoming
signal on one frequency and re-transmits on another. The difference between these two fre-
quencies is called the offset frequency. The offset is variable between 0 to 99.995MHz on
this unit.
- 0.600
+ 0.600
Shift release (off)
At –600kHz
1.
After pressing the FUNC key, by pressing MHz
key while [F] appears on the display, the dis-
play will show the current status of offset fre-
quency and shift direction. By repeating to
press MHz key, shift direction will be changed
as right.
2.
By rotating the dial (pressing UP/DOWN key)
while shift frequency is displayed, one click will
change the frequency by one channel step.
3.
After pressing the FUNC key, rotating the dial
will change the frequency by 1MHz depend-
ing on which direction the dial is rotated (how
UP/DOWN key is pressed).
4.
Pressing PTT key or V/M key will complete
the setting and the display will return to the
original status.
