manualshive.com logo in svg

Alinco DJ-X3, Руководство пользователя

Поделиться
Скачать
Alinco DJ-X3 Скачать руководство пользователя страница 9

11

■

Battery Recharger 

· Recharging with the EDC-105

1. Mount NiMH battery pack on the

transceiver. (The NiMH battery
pack itself is also mountable on
the battery recharger.)

2. Connect AC adapter plug to the

battery recharger. 

3. Select the position 1 to 3 with the

lever on the recharger and adjust
the battery pack to fit with it.
(According to a type of battery
pack, position of the lever
changes.)

4. Set the battery pack to the

recharger making contact with
terminals on the rear side of the
transceiver and those on the
recharger side.

5. Connect the power plug to the AC

outlet. 

6. The red light on the recharger

goes on and starts to recharge.
(While connecting to the AC outlet,
the charge status is maintained.)

Caution!

· When battery temperature exceeds a certain level, protective function

operates automatically and turns off the charge status. (The red light goes
off.)
In that case, unplug the recharger and dismount the transceiver or the
battery pack immediately. After removing the cause, then use the battery
recharger.

· Turn the transceiver power off before recharging the battery pack.
· Disconnect the EDC-105 from the outlet while not using it. 
· Never charge battery packs of other manufactures with this charger.
· The required recharging time depends on the condition and model of a

battery pack, but it may take at most 10 hours. Refer to the instruction
manual of the battery pack.

· Never short-circuit the recharging terminals of this recharger with metal

objects, etc. The charger can be damaged.

· The ECD-105 does not work when the voltage from the wall outlet is

extremely low.

AC adapter plug

Terminals

(rear side)

Terminals

on the rechager

Lever

（

1

〜

3

）

Power plug

1

2

3

Содержание DJ-X3


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды