7.Special Functions
7
42
7. Special Functions
Use this function when the receiving signal is interfered by strong signals of nearby
channels. When you activate this function, the transceiver attenuates the receiving
sensitivity.
1. Press the FUNC key, and while
is displayed on the LCD, press the
key.
2. Rotate the dial to change the ATT level. There are 2 levels; ATT-1 attenuates the
received signal by 10dB and ATT-2 does 20dB. Press any key other than the
or MONI key to complete setting. Observe that "
" appears on the display.
Press the
key in the setting sequence to display "ATT-OFF" then press any
key other than the
or MONI key to turn off this function. Observe that
"
" disappears from the display.
Repeating improper recharge of the Ni-MH battery pack may cause so-called the
"memory effect" that the battery holds less charge. To avoid this, it is recommended
to fully discharge the battery pack then full charge. This function helps discharging
the battery pack. Please remove the unit from a charger or a DC cable before this
operation.
1. Activate the Keylock (page 32).
2. Press the
key twice, the
key twice, the
key twice and then the
key twice.
"DISCHG" will be displayed on the LCD, and the
battery-refresh starts.
3. To cancel this operation, just turn off the unit, turn it on again, then unlock the
Keylock function.
4. The unit will turn off automatically when finished the refresh.
Battery Refresh
7.2
ATT-1
ATT-2
ATT (Attenuator)
7.1
Содержание DJ-V17E
Страница 8: ......
