Alinco DJ-S17 E Скачать руководство пользователя страница 30

Страница: 30 / 66

4.Basic Operation

This mode is used to recall a most frequently used memory channel (stored in MC

channel) with a single key-touch.

1. Press the

key.

" " is displayed on the LCD, and the channel

programmed in MC is recalled.

2. Press the

key again in the Call mode to return

to original operating mode (VFO/memory).

1. Turn on the unit.

2. Press the

key and rotate the dial to adjust the audio level as necessary.

3. Press the

key and rotate the dial to adjust the squelch level.

4. Select the frequency that you wish to operate by using the dial. When a signal is received

on the frequency that you selected,

and S-meter are displayed on the LCD, then

the received signal can be heard. The green RX indicator also lights at this time.

4.7.1 Monitor Function

In case the receiving signal is weak and the audio is intermittently cut off by the

squelch, press the MONI key. As long as this key is pressed, the squelch including

TSQ/DCS unmutes making the audio easier to hear.

• The squelch is unmuted while the MONI key is pressed, regardless of the squelch

level setting.

• This function unmutes the squelch even if the DCS and Tone Squelch functions are set.

Receiving

4.7

IMPORTANT NOTE:

• The dial operation of frequency/memory channel is blocked in the Call mode.
• It is possible to temporary change the offset and CTCSS/DCS related

parameters in the Call mode by entering to the Set mode in the Call channel.

• The Scan function is deactivated in the Call mode.
• The CALL channel reprogramming is possible but it can't be deleted from the

memory channel mode.

NOTE:

Refer to "How to Program Call Channel" on page 28 for programming Call channel.

Call-Channel Mode

4.6

Содержание DJ-S17 E



































































Результаты поиска

Содержание DJ-S17 E

Отзывы:

Похожие инструкции для DJ-S17 E

Бренды по названию

Популярные бренды

Alinco DJ-S17 E, Инструкция по эксплуатации

Результаты поиска

Содержание DJ-S17 E

Отзывы:

Похожие инструкции для DJ-S17 E

Бренды по названию

Популярные бренды