25
SCM TO:
When an incoming signal is catched, radio stops scan and stays at the
channel
5s before resuming the scan.
SCM CO:
When an incoming signal is catched, radio stops scan and stays at the
channel
until the signal disappears, and resumes scan approx 2s later.
SCM SE:
When an incoming signal is catched, radio terminates the scan.
26. Mic Level
There are 5 levels to selectable the Microphone gain, level 1 is the lowest, level and 5
is highest gain.
27. Time mute
Select On to turn the radio mute in a pre-setting time. During the pre-setting time the
radio will mute the sound of keypad and the voice of incoming call. After the preo-
setitng time radio will become normal status. To set the duration of mute time, go to
PC software-> Other->Mute Timing.
28. DTMF Speed
Offers DTMF encode speed selectable for receiver decode speed is more suitable,
50~500ms are the options.
29. FM Radio
Turn On/Off the FM radio.
30. FM Radio Monitoring
Mon On:
During FM radio is On, radio still allows to receive or transmit signal on the
channel.
Mon Off:
During FM radio is Off, radio will not allow to receive and transmits signal
on the channel.
31. Start Radio Password
On:
Set up the password for start up. You need to input the password to
power on the
radio.
Off:
No password is required for the radio power on start up.
Note.
In Case you forgot the password. Using the PC software to read data and it is
able to check password on PC software interface.
Содержание DJ-MD5X
Страница 36: ...36 ...
