AliMed
®
Inc.
297 High St., Dedham, MA 02026 USA
PH 800.225.2610 • FAX 800.437.2966
Manufactured for:
AliMed.com
#7721REV0919 CCO982
©2019 AliMed
®
Inc. All rights reserved.
Made in China
EC
REP
MDSS GmbH
Schiffgraben 41
30175 Hannover,
Germany
Wall Mounting Instructions
1. Secure the bracket to the wall with the screws
provided (Fig. 3).
2. Align mounting slot on Motion Sensor with
mounted bracket.
3. Slide Motion Sensor from the left until secured
in place on the mounted bracket (Fig. 5).
3. Adjust Motion Sensor angle as needed.
Note: Once mounted to wall, Motion Sensor can
be easily removed following the same installation
instructions.
4. The Motion Sensor is now ready to use.
Figure 5
Slide Motion Sensor
from the left until
secured in place on
bracket
Environmental Conditions
Symbol Glossary
Operational
Storage
Transport
Temperature
10°–40°C
-25°–70°C
-25°–70°C
50°–104°F
-13°–158°F
-13°–158°F
Humidity
30%–75%
0%–95%
0%–95%
Non-condensing Non-condensing Non-condensing
Pressure
700–1060 hPa 700–1060 hPa 700-1060 hPa
Manufacturer
LOT
Batch Code/Lot Number
REF
Catalog Number/Item Number
SN
Serial Number
European Conformity Mark
Authorized representative in the
European Community
Tested/certification for compliance
to published industry standards
Consult instructions for use
Caution: Read all warnings and
precautions in instructions for use
Indicates FCC has certified device
Indicates compliance to RoHS and is free
of substances banned by RoHS
DO NOT THROW IN TRASH
Failure to comply with warning may result in injury or death. This device is not suitable for all
individuals. Other devices may be required. This device is not a substitute for visual monitoring by
caregiver. The manufacturer does not claim that this device will stop elopement and/or stop falls. This
device is designed to augment caregiver’s comprehensive resident mobility management program. This
product is to be used by a licensed caregiver only. As such, it is the entire responsibility of the caregiver
to ensure that the system is properly installed and tested. Further, the system is not designed to replace
good caregiving practices including, but not limited to:
a.) Direct patient supervision
b.) Adequate training for personnel for fall prevention and elopement
c.) Testing of the system before each use
Limited Warranty: Seller warrants that the goods sold will be free from defects of workmanship and
manufacturing for a period of one year from the date of sale.
#713817 AliMed ONE Wireless Motion Sensor
#71088 9V Battery, 12/pk
Additional AliMed ONE System Components
#713815 Wireless Alarm Base
#713816 Wireless Hall Alert
#713818 Wireless Sensor Pad Transmitter (one required for each sensor pad)
#713819 30-Day Wireless Bed Sensor Pad, ea
#713866, 10/pk
#713834 6-Month Wireless Bed Sensor Pad, ea #713867, 10/pk
#713838 1-Year Wireless Bed Sensor Pad, ea
#713868, 10/pk
#713821 30-Day Wireless Chair Sensor Pad, ea #713822, 10/pk
#713836 6-Month Wireless Chair Sensor Pad, ea #713837, 10/pk
#713840 1-Year Wireless Chair Sensor Pad, ea #713841, 10/pk
#713823 14-Day Wireless Toilet Sensor Pad, ea
Reorder Information
Warning
Care
1. Wipe with soft, non-abrasive cloth using a 1:10 bleach solution (contains 0.5% chlorine concentration)
or follow your facility’s cleaning protocol.
2.
Do not immerse in fluids.
3. After cleaning, check unit is functioning properly.
CONFORMS TO AAMI STD ES60601-1, IEC STD 60601-1-6
CERTIFIED TO CSA STD C22.2 NO. 60601-1, NO. 60601-1-6
